| DIN-1 |
Taper Pins |
| DIN-7 |
Parallel Pins |
| DIN 13-1 |
ISO general purpose metric screw threads – Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
| DIN 13-10 |
ISO general purpose metric screw threads – Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
| DIN 13-11 |
ISO general purpose metric screw threads – Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm |
| DIN 13-2 |
ISO general purpose metric screw threads – Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm |
| DIN 13-20 |
ISO general purpose metric screw threads – Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm |
| DIN 13-21 |
ISO general purpose metric screw threads – Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm |
| DIN 13-22 |
ISO general purpose metric screw threads – Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm |
| DIN 13-23 |
ISO general purpose metric screw threads – Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm |
| DIN 13-24 |
ISO general purpose metric screw threads – Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm |
| DIN 13-25 |
ISO general purpose metric screw threads – Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm |
| DIN 13-26 |
ISO general purpose metric screw threads – Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
| DIN 13-28 |
ISO Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles |
| DIN 13-3 |
ISO general purpose metric screw threads – Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm |
| DIN 13-4 |
ISO general purpose metric screw threads – Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm |
| DIN 13-5 |
ISO general purpose metric screw threads – Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
| DIN 13-50 |
ISO general purpose metric screw threads – Part 50: Combination of tolerance classes for formed internal screw threads |
| DIN 13-51 |
ISO general purpose metric screw threads – Part 51: External screw threads for transition fits (former: screw threads for interference fit) – tolerances, limit deviations, limits of sizes |
| DIN 13-52 |
ISO general purpose metric screw threads – Part 52: Multi-start thread tolerances and deviation of profile |
| DIN 13-6 |
ISO general purpose metric screw threads – Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
| DIN 13-7 |
ISO general purpose metric screw threads – Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm |
| DIN 13-7 Berichtigung 1 |
ISO general purpose metric screw threads – Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1 |
| DIN 13-8 |
ISO general purpose metric screw threads – Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm |
| DIN 13-9 |
ISO general purpose metric screw threads – Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
| DIN 74 |
Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721 |
| DIN 76-1 |
Thread run-outs and thread undercuts – Part 1: For ISO metric threads in accordance with DIN 13-1 |
| DIN 78 |
Protrusions of bolt ends |
| DIN 95 |
Slotted raised countersunk (oval) head wood screws |
| DIN 96 |
Slotted round head wood screws |
| DIN 97 |
Slotted countersunk (flat) head wood screws |
| DIN 101 |
Rivets – Technical specifications |
| DIN 103-1 |
ISO Metric Trapezoidal Screw Thread; Profiles |
| DIN 103-2 |
ISO Metric Trapezoidal Screw Thread; General Plan |
| DIN 103-3 |
ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose |
| DIN 103-4 |
ISO Metric Trapezoidal Screw Thread; Nominal Dimensions |
| DIN 103-5 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-6 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter |
| DIN 103-7 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-8 |
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter |
| DIN 103-9 |
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features |
| DIN 124 |
Steel round head rivets – Nominal diameters from 10 mm to 36 mm |
| DIN 158-1 |
Metric external taper screw threads and mating internal parallel screw threads – Part 1: Nominal sizes, limit deviations, limits of size and verification |
| DIN 158-2 |
Metric external taper screw thread and mating internal parallel screw threads – Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features |
| DIN 186 |
T-head bolts with square neck |
| DIN 188 |
T-head bolts with double nib |
| DIN 202 |
Screw threads – General plan |
| DIN 258 |
Taper pins with thread ends and constant taper lengths |
| DIN 261 |
T-head bolts |
| DIN 262-1 |
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions |
| DIN 262-2 |
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges |
| DIN 264-1 |
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions |
| DIN 264-2 |
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges |
| DIN 267-13 |
Fasteners – Technical specifications – Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-2 |
Fasteners – Technical specification, surface roughness for product classes A and B |
| DIN 267-24 |
Fasteners – Technical delivery conditions – Part 24: Hardness classes for nuts without specified proof load values |
| DIN 267-26 |
Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections |
| DIN 267-27 |
Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications |
| DIN 267-28 |
Fasteners – Part 28: Steel screws, bolts and studs with locking coating, Technical specifications |
| DIN 267-29 |
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-30 |
Fasteners – Technical specifications – Part 30: Metric thread rolling screws of property class 10.9 |
| DIN 267-31 |
Fasteners – Technical specifications – Part 31: Metric thread rolling screws of property class 10.9 with additionally hardened thread forming zone |
| DIN 302 |
Countersunk head rivets – Nominal diameters 10 mm to 36 mm |
| DIN 314 |
Wing nuts – Edged wings |
| DIN 315 |
Fasteners – Wing nuts – Rounded wings |
| DIN 316 |
Fasteners – Wing screws – Rounded wings |
| DIN 318 |
Fasteners – Wing screws – Edged wings |
| DIN 431 |
Pipe nuts with thread according to DIN EN ISO 228-1 |
| DIN 434 |
Square taper washers for U-sections |
| DIN 435 |
Square taper washers for I-sections |
| DIN 436 |
Square washers for use in timber constructions |
| DIN 440 |
Washers – With square hole, especially for timber constructions |
| DIN 444 |
Fasteners – Eye bolts |
| DIN 464 |
Knurled thumb screws, high type |
| DIN 466 |
Knurled nuts, high type |
| DIN 467 |
Knurled nuts, low type |
| DIN 470 |
Sealing washers |
| DIN 471 |
Retaining rings for shafts – Normal type and heavy type |
| DIN 472 |
Retaining rings for bores – Normal type and heavy type |
| DIN 475-1 |
Widths across flats for bolts, screws, valves and fittings |
| DIN 478 |
Square head bolts with collar |
| DIN 479 |
Square head bolts with short dog point |
| DIN 480 |
Square head bolts with collar and short dog point with rounded end |
| DIN 508 |
Nuts for T-slots |
| DIN 525 |
Studs for welding |
| DIN 529 |
Masonry and foundation bolts |
| DIN 546 |
Slotted round nuts |
| DIN 547 |
Round nuts with drilled holes in one face |
| DIN 548 |
Round nuts with set pin holes in side |
| DIN 557 |
Square nuts; product grade C |
| DIN 561 |
Hexagon head set screws with small hexagon and full dog point |
| DIN 562 |
Square thin nuts – Product grade B |
| DIN 564 |
Hexagon head set screws with small hexagon and half dog point and flat cone point |
| DIN 571 |
Hexagon head wood screws |
| DIN 580 |
Lifting eye bolts |
| DIN 582 |
Lifting eye nuts |
| DIN 603 |
Cup head square neck bolts |
| DIN 604 |
Flat countersunk head nib bolts |
| DIN 605 |
Flat countersunk head square neck bolts with long square |
| DIN 607 |
Cup head nib bolts |
| DIN 608 |
Flat countersunk head square neck bolts with short square |
| DIN 609 |
Hexagon fits bolts with long thread |
| DIN 653 |
Knurled thumb screws, low type |
| DIN 660 |
Round head rivets – Nominal diameters 1 mm to 8 mm |
| DIN 661 |
Countersunk head rivets – Nominal diameters 1 mm to 8 mm |
| DIN 674 |
Flat round head rivets – Nominal diameters 1,4 mm to 6 mm |
| DIN 675 |
Flat countersunk head rivets – Nominal diameters 3 mm to 5 mm |
| DIN 705 |
Adjusting rings |
| DIN 787 |
Bolts and screws for T-slots |
| DIN 797 |
Special foundation bolts |
| DIN 802-5 |
Tolerances on the threaded portion of tape – Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion |
| DIN 802-6 |
Manufacturing to tolerances on the threaded portion of screwing taps – Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads |
| DIN 835 |
Studs – Metal end ≈ 2 d |
| DIN 917 |
Hexagon cap nuts, low type |
| DIN 918 |
Fasteners – Terminology, spelling of terms, abbreviations |
| DIN 918 Beiblatt 3 |
Fasteners – Supplement 3: European Standards – Survey |
| DIN 920 |
Slotted pan head screws with small head |
| DIN 921 |
Slotted pan head screws with large head |
| DIN 922 |
Slotted pan head screws with small head and full dog point |
| DIN 923 |
Slotted pan head screws with shoulder |
| DIN 924 |
Slotted raised countersunk head screws with dog point |
| DIN 925 |
Slotted countersunk head screws with dog point (flat head) |
| DIN 927 |
Slotted shoulder screws |
| DIN 928 |
Square weld nuts |
| DIN 929 |
Hexagon weld nuts |
| DIN 931-2 |
Hexagon head bolts – Part 2: Metric thread M 68 to M 160 x 6 – Product grade B |
| DIN 935-1 |
Hexagon slotted and castle nuts – Part 1: Metric coarse and fine pitch thread, product grades A and B |
| DIN 935-3 |
Hexagon slotted nuts – Part 3: Metric coarse pitch thread, product grade C |
| DIN 938 |
Studs – Metal end ≈ 1 d |
| DIN 939 |
Studs – Metal end ≈ 1,25 d |
| DIN 940 |
Studs – Metal end ≈ 2,5 d |
| DIN 962 |
Bolts, screws, studs and nuts – Designations, types and finishes |
| DIN 967 |
Cross recessed pan head screws with collar – Product grade A |
| DIN 968 |
Cross recessed pan head tapping screws with collar |
| DIN 969 |
Threaded fasteners – Axial load fatigue testing – Test methods and evaluation of results |
| DIN 974-1 |
Diameters of counterbores – Manufacturing dimensions – Part 1: Hexagon socket head cap screws and screws with cheese head or pan head |
| DIN 974-2 |
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions |
| DIN 976-1 |
Fasteners – Stud bolts – Part 1: Metric thread |
| DIN 976-2 |
Fasteners – Stud bolts – Part 2: Metric interference thread MFS |
| DIN 979 |
Hexagon thin slotted and castle nuts – Metric coarse and fine pitch thread, product grades A and B |
| DIN 981 |
Rolling bearings – Locknuts |
| DIN 986 |
Prevailing torque type hexagon domed cap nuts with nonmetallic insert |
| DIN 1441 |
Washers for clevis pins – Product grade C |
| DIN 1445 |
Clevis pins with head and threaded portion |
| DIN 1469 |
Grooved pins, half length grooved with gorge |
| DIN 1587 |
Hexagon domed cap nuts, high type |
| DIN 2509 |
Fasteners – Double end studs |
| DIN 2510-1 |
Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation |
| DIN 2510-6 |
Bolted connections with waisted shank – Part 6: Cap nuts |
| DIN 3125 |
Hexagon socket wrenches, spin type – Dimensions and test torques |
| DIN 3132 |
Toggle-type fasteners; salient, with short base plate |
| DIN 3133 |
Toggle-type fasteners; salient; with elongated base plate |
| DIN 3134 |
Toggle-type fasteners; with and without locking eye |
| DIN 3852-1 |
Stud ends and ports of fittings, valves and plug screws – Part 1: Dimensions for metric fine pitch thread |
| DIN 3852-2 |
Stud ends and ports of fittings, valves and plug screws – Part 2: Dimensions for pipe thread |
| DIN 3870 |
Non-soldering and soldering compression fittings – Union nuts series LL |
| DIN 3872 |
Non-soldering compression couplings – Union nuts for butt joints |
| DIN 3900 |
Non soldering compression fittings with cutting ring series LL – Straight studs with taper thread |
| DIN 3903 |
Non soldering compression fittings with cutting ring – Elbow stud with taper threaded stud end (not for new design) |
| DIN 3906 |
Non soldering compression fittings with cutting ring – Branch T-stud with taper threaded stud end (not for new design) |
| DIN 3913 |
Non soldering compression fittings with cutting ring – Run T-stud with taper threaded stud end (not for new design) |
| DIN 3946 |
Non-soldered compression fittings – Straight reducing swivel adaptors with 24° cone connectors with O-ring – For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 4000-160 |
Tabular layout of product properties – Part 160: Fasteners with external thread |
| DIN 4000-161 |
Tabular layout of product properties – Part 161: Fasteners with internal thread |
| DIN 4000-163 |
Tabular layout of properties – Part 163: Fasteners without thread |
| DIN 5294 |
Studs for screwing in and riveting on |
| DIN 5437 |
Hand pumps; semirotary pumps; sizes, performance and dimensions |
| DIN 5526 |
Pins with head for rail vehicles |
| DIN 5586 |
Compressed air equipment for rail vehicles; locking screws with collar and vent |
| DIN 5903-1 |
Fish bolts – Part 1: With round head and oval neck |
| DIN 5903-2 |
Fish bolts – Part 2: With square head |
| DIN 6063-2 |
Threads, mainly for plastic containers – Part 2: Trapezoidal screw threads, dimensions |
| DIN 6303 |
Knurled nuts+B399 |
| DIN 6304 |
Tommy screws with fixed clamping bolt |
| DIN 6305 |
Tommy nuts with fixed clamping bolt |
| DIN 6306 |
Tommy screws with movable clamping bolt |
| DIN 6307 |
Tommy nuts with movable clamping bolt |
| DIN 6319 |
Spherical washers, conical seats |
| DIN 6330 |
Hexagon nuts with a height of 1,5 d |
| DIN 6331 |
Hexagon collar nuts with a height of 1,5 d |
| DIN 6332 |
Grub screws with thrust point |
| DIN 6379 |
Studs for use with tee nuts |
| DIN 6791 |
Semi-tubular pan head rivets – Nominal diameters 1,6 mm to 10 mm |
| DIN 6796 |
Conical spring washers for bolted connections |
| DIN 6799 |
Retaining washers for shafts |
| DIN 6900-5 |
Screw and washer assemblies with coarse thread – Part 5: With captive conical spring washer |
| DIN 6908 |
Conical spring washers for screw and washer assemblies |
| DIN 6917 |
Square taper washers for high-strength structural bolting of steel I sections |
| DIN 6918 |
Square taper washers for high-strength structual bolting of steel channel sections |
| DIN 6929 |
Screws with coarse thread and reduced shank for captive applications |
| DIN 7331 |
Compression rivets |
| DIN 7338 |
Rivets for brake linings and clutch linings |
| DIN 7339 |
Hollow rivets, one piece, drawn from strip |
| DIN 7340 |
Tubular rivets cut from the tube |
| DIN 7349 |
Plain washers for bolts with heavy clamping sleeves |
| DIN 7500-2 |
Thread rolling screws for ISO metric thread – Part 2: Guideline values for hole diameters |
| DIN 7513 |
Thread cutting screws – Hexagon screws and slotted head screws – Dimensions, requirements, testing |
| DIN 7516 |
Thread cutting screws – Cross recessed head screws – Dimensions, requirements, testing |
| DIN 7603 |
Sealing rings |
| DIN 7604 |
Hexagon head screw plugs – Light type – Cylindrical thread |
| DIN 7965 |
Screwed Inserts (Screw Plugs) |
| DIN 7975 |
Tapping screw connections – Guideline values for core hole diameters and use |
| DIN 7984 |
Hexagon socket head cap screws with low head |
| DIN 7989-1 |
Washers for steel structures – Part 1: Product grade C |
| DIN 7989-2 |
Washers for steel structures – Part 2: Product grade A |
| DIN 7990 |
Hexagon head bolts with hexagon nut for steel structures |
| DIN 7992 |
T-head bolts with large head |
| DIN 7995 |
Cross recessed raised countersunk head wood screws |
| DIN 7996 |
Cross recessed round head wood screws |
| DIN 7997 |
Cross recessed countersunk head wood screws |
| DIN 7998 |
Threads and Thread Ends for Wood Screws |
| DIN 8140-1 |
Wire thread inserts for ISO metric screw threads – Part 1: Dimensions, technical specifications |
| DIN 8140-2 |
Wire thread inserts for ISO metric screw threads – Part 2: Helical coil threads for inserts, thread tolerances |
| DIN 8140-2 Berichtigung 1 |
Wire thread inserts for ISO metric screw threads – Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08 |
| DIN 8140-3 |
Wire thread inserts for ISO metric screw threads – Part 3: Gauges and gauge sizes |
| DIN 8141-1 |
ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes |
| DIN 8141-2 |
ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads |
| DIN 8243 |
Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4 |
| DIN 8245 |
Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4 |
| DIN 15401-2 |
Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
| DIN 15402-2 |
Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
| DIN 15403 |
Lifting Hooks for Hoists; Knuckle Threads |
| DIN 15413 |
Bottom blocks for lifting appliances; lifting hook nuts |
| DIN 17022-1 |
Heat treatment of ferrous materials – Methods of heat treatment – Part 1: Hardening, austempering, annealing, quenching, tempering of components |
| DIN 17022-2 |
Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools |
| DIN 17022-4 |
Heat treatment of ferrous materials – Methods of heat treatment – Part 4: Nitriding and nitrocarburizing |
| DIN 25200 |
Screws, bolts and nuts for rail vehicles – Summary |
| DIN 29638-2 |
Aerospace – Press nuts, self-locking – Part 2: Directions for design and installation; Text in German and English |
| DIN 29895 |
Aerospace – Alternative materials for fasteners; Inactive for new design |
| DIN 29895-2 |
Aerospace – Alternative materials for fasteners – Solid rivets; Inactive for new design |
| DIN 29921 |
Aerospace; blind rivets of steel with hexagon head and thread locking |
| DIN 29924 |
Aerospace; blind rivets of steel with countersunk head 100° and thread locking |
| DIN 30295-1 |
Rounded Trapezoidal Threads; Nominal Dimensions |
| DIN 30295-2 |
Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges |
| DIN 34800 |
Bolts and screws with external hexalobular driving feature with small flange |
| DIN 34801 |
Bolts and screws with external hexalobular driving feature with large flange |
| DIN 34802 |
Hexalobular socket heat cap screw with large driving feature |
| DIN 34803 |
Split pin holes and wire holes for bolts, screws and studs |
| DIN 34804 |
Fasteners – Change of appearance of black surfaces coating systems |
| DIN 34805-1 |
Button head screws – Part 1: Driving feature hexalobular socket |
| DIN 34805-2 |
Button head screws – Part 2: Screws with collar and driving feature hexalobular socket |
| DIN 34810 |
Plastic hexagon head screws |
| DIN 34814 |
Plastic hexagon nuts |
| DIN 34815 |
Plastic plain washers – Normal series |
| DIN 34816 |
Plastic plain washers – Large series |
| DIN 34817 |
Weld screws with metric thread |
| DIN 34818 |
Sheet spring nuts with tappping sc+B356rew thread |
| DIN 34819 |
Hexalobular socket raised head tapping screws with collar |
| DIN 34821 |
Cheese head screws with 12 point socket |
| DIN 34822 |
Cheese head screws with flange with 12 point socket |
| DIN 34823 |
Raised countersunk head screws with 12 point socket |
| DIN 34825 |
Cylindrical head screws with inner contact flange – Driving feature 12 point socket |
| DIN 34827 |
Hexalobular socket set screws |
| DIN 34828 |
Welding studs for turnbuckles |
| DIN 46288 |
Connecting Washers for Conductors |
| DIN 65016 |
Aerospace – Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C – Technical Specification |
| DIN 65058 |
Aerospace – Bolts and screws in corrosion-resisting steels, with normal tensile strength of 900 MPa and 1100 MPa, for temperatures up to 425 °C – Technical specification; Text in German and English |
| DIN 65100 |
Aerospace series – Wire thread inserts, screw-locking, copper alloy – Class: 490 MPa/300 °C; Text in German and English |
| DIN 65110 |
Aerospace; bihexagonal heads for screws and bolts |
| DIN 65115 |
Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65149 |
Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification |
| DIN 65151 |
Aerospace series – Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) |
| DIN 65177 |
Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C |
| DIN 65179 |
Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65185-1 |
Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification |
| DIN 65187 |
Aerospace; inserts for composite materials, with clearance hole, aluminium alloy |
| DIN 65188 |
Aerospace – Inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy; Text in German and English |
| DIN 65189 |
Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy |
| DIN 65190 |
Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy |
| DIN 65191 |
Aerospace – Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel |
| DIN 65209 |
Aerospace series – Washers, countersunk; Text in German and English |
| DIN 65220 |
Aerospace – Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C |
| DIN 65238 |
Aerospace – Anchor nuts with MJ t+B588hread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C |
| DIN 65239 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65240 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65242 |
Aerospace – Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English; Inactive for new design |
| DIN 65243 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65244 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English; Inactive for new design |
| DIN 65245 |
Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65246 |
Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65247 |
Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C |
| DIN 65249 |
Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C |
| DIN 65251 |
Aerospace series – Bolts, with MJ threads, in titanium alloys, strength class 900 MPa and 1 100 MPa – Technical specification |
| DIN 65258 |
Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series |
| DIN 65259 |
Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series |
| DIN 65260 |
Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series |
| DIN 65265 |
Aerospace series – Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65267 |
Aerospace series – Screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65269 |
Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65270 |
Aerospace – Nuts, hexagon, slotted/castellated with MJ thread, self-locking, corrosion-resisting steel, classification: 1 100 MPa/120 °C; Text in German and English; Inactive for new design |
| DIN 65281 |
Aerospace series – Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65284 |
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65285 |
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65286 |
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c |
| DIN 65289 |
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65313 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65314 |
Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel – Nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65316 |
Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel – Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English |
| DIN 65317 |
Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65318 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C |
| DIN 65319 |
Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65320 |
Aerospace series – Pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65324 |
Aerospace series – Pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65330 |
Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65338 |
Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65339 |
Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel – Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English |
| DIN 65342 |
Aerospace series – Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English |
| DIN 65343 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C |
| DIN 65344 |
Aerospace – Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65345 |
Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 °C |
| DIN 65346 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65347 |
Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65349 |
Aerospace – Testing of locking torques for nuts and related threaded parts, with metric screw thread – Test methods |
| DIN 65350-4 |
Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets |
| DIN 65363 |
Aerospace; lock washers for flight control rods |
| DIN 65364 |
Aerospace; single fork ends for adjustable control rods |
| DIN 65365 |
Aerospace; double fork ends for adjustable control rods |
| DIN 65391 |
Aerospace – Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65392 |
Aerospace – Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C |
| DIN 65393 |
Aerospace – Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C |
| DIN 65394 |
Aerospace – Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C |
| DIN 65395 |
Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65396 |
Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 °C |
| DIN 65397 |
Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65398 |
Aerospace series – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel, classification: 900 MPa/1 100 MPa/315 °C; Text in German and English |
| DIN 65428 |
Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with protruding head; Text in German and English |
| DIN 65429 |
Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with protruding head; Text in German and English |
| DIN 65430 |
Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with countersunk head; Text in German and English |
| DIN 65431 |
Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with countersunk head; Text in German and English |
| DIN 65433 |
Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English |
| DIN 65434 |
Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English |
| DIN 65435 |
Aerospace; sleeves for fasteners; technical specification |
| DIN 65438 |
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65439 |
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C |
| DIN 65440 |
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C |
| DIN 65441 |
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C |
| DIN 65443 |
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C |
| DIN 65444 |
Aerospace; rivets, 100° countersunk head, nickel alloy, metric series |
| DIN 65445 |
Aerospace; rivets, 100° reduced countersunk head, metric series, nickel alloys |
| DIN 65446 |
Aerospace; rivets, universal head, nickel alloys, metric series |
| DIN 65451 |
Aerospace – Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C |
| DIN 65456 |
Aerospace; washers for flight control rods, with hole for bonding |
| DIN 65464 |
Aerospace – Studs with MJ thread, ring locked, titanium alloy – Nominal tensile strength 1100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65477 |
Aerospace – Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65480 |
Aerospace series – Hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel – Class: 1100 MPa/315 °C; Text in German and English |
| DIN 65485 |
Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly |
| DIN 65486 |
Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight |
| DIN 65487 |
Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head |
| DIN 65488 |
Aerospace; fasteners for structural application; rotary fasteners; installation dimensions |
| DIN 65489 |
Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer |
| DIN 65492 |
Aerospace; fasteners for structural application; rotary fasteners; receptacle |
| DIN 65493 |
Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight |
| DIN 65500 |
Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy |
| DIN 65502 |
Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65503 |
Aerospace – Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, fuel resistant from -55 °C to 120 °C |
| DIN 65504 |
Aerospace – Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, fuel resistant from -55 °C to 120 °C |
| DIN 65505 |
Aerospace – Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 °C to 230 °C |
| DIN 65506 |
Aerospace series – Anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, air resistant, from -55 °C to 230 °C |
| DIN 65507 |
Aerospace – Nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel, class: 1 100 MPa/235 °C; Text in German and English |
| DIN 65508 |
Aerospace – Nuts, hexagon with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel – Class: 1 100 MPa/315 °C/425 °C; Text in German and English |
| DIN 65510 |
Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C |
| DIN 65515 |
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65516 |
Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65517 |
Aerospace series – Cheese head bolts, close tolerance, with internal serrations and MJ thread, short thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65518 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65519 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65520 |
Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65522 |
Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65523 |
Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65524 |
Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65525 |
Aerospace series – Bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65526 |
Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65527 |
Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C |
| DIN 65528 |
Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 °C |
| DIN 65529 |
Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 °C |
| DIN 65530 |
Aerospace – Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C |
| DIN 65531 |
Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 °C/425 °C |
| DIN 65533 |
Aerospace – Bolts, screws and nuts – Allocation of materials and surface treatments, recommended selection; Text in German and English |
| DIN 65534 |
Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C |
| DIN 65535 |
Aerospace; gang channel nut assembly, with self-locking nuts with MJ thread, nut spacing fixed or optional, in corrosion-resisting steel; class: 1100 MPa/315 °C |
| DIN 65537 |
Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65538 |
Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65539 |
Aerospace – Cheese head bolts, with internal serration and MJ-thread, reduced shank, nickel alloy, nominal tensile strength 1 250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65540 |
Aerospace – Cheese head bolts, with internal serration and MJ-thread, reduced shank, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C |
| DIN 65541 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65542 |
Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65545 |
Aerospace series – Nuts, hexagon, with MJ-thread, self-locking, corrosion-resisting steel, class: 1 100 MPa/120 °C; Text in German and English |
| DIN 65546 |
Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 °C/425 °C |
| DIN 65547 |
Aerospace; rivets, close tolerance, with protruding head, metric series, titanium alloy |
| DIN 65548 |
Aerospace; rivets, close tolerance with 100° flush head, metric series, titanium alloy |
| DIN 65549 |
Aerospace; rivets, close tolerance with 130° flush head, metric series, titanium alloy |
| DIN 65551 |
Aerospace; blind rivets with 100° reduced countersunk head, metric series, corrosion-resisting steel, with mandrel |
| DIN 65552 |
Aerospace; blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel, metric series |
| DIN 65554 |
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65555 |
Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65576 |
Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism |
| DIN 65578 |
Aerospace; quick-release pins in corrosion-resisting steel, single locked, with pull or push release mechanism |
| DIN 71803 |
Angle joints with screw studs, with rivet studs |
| DIN 80701 |
Wing nuts |
| DIN 80704 |
Bow Nuts; Metric Screw Thread |
| DIN 80705 |
Thin nuts with small widths across flats – Coarse pitch thread, fine pitch thread |
| DIN 89284 |
Cap srews for mounting holes and glands according to DIN 89280; Text in German and English |
| DIN EN 912 |
Timber fasteners – Specifications for connectors for timbers; German version EN 912:2011 |
| DIN EN 1515-1 |
Flanges and their joints – Bolting – Part 1: Selection of bolting; German version EN 1515-1:1999 |
| DIN EN 1515-3 |
Flanges and their joints – Bolting – Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005 |
| DIN EN 1515-4 |
Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU; German version EN 1515-4:2021 |
| DIN EN 1661 |
Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997 |
| DIN EN 1662 |
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997 |
| DIN EN 1663 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997 |
| DIN EN 1664 |
Prevailing torque type – All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997 |
| DIN EN 1665 |
Hexagon bolts with flange, heavy series; German version EN 1665:1997 |
| DIN EN 1666 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997 |
| DIN EN 1667 |
Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997 |
| DIN EN 2143 |
Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992 |
| DIN EN 2146 |
Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992 |
| DIN EN 2148 |
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992 |
| DIN EN 2264 |
Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
| DIN EN 2413 |
Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
| DIN EN 2549 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 2550 |
Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992 |
| DIN EN 2551 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992 |
| DIN EN 2552 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992 |
| DIN EN 2553 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992 |
| DIN EN 2555 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992 |
| DIN EN 2556 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992 |
| DIN EN 2649 |
Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995 |
| DIN EN 2650 |
Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996 |
| DIN EN 2651 |
Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996 |
| DIN EN 2652 |
Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997 |
| DIN EN 2653 |
Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996 |
| DIN EN 2654 |
Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996 |
| DIN EN 2680 |
Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS₂ lubricated, metric series – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
| DIN EN 2753 |
Aerospace series – Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
| DIN EN 2754 |
Aerospace series – Nuts, anchor, self locking, two lug, floating with counterbore – Classification: 1100 MPa/235 °C; German and English version EN 2754:2006 |
| DIN EN 2786 |
Aerospace series – Electrolytic silver plating of fasteners; German and English version EN 2786:2008 |
| DIN EN 2809 |
Aerospace series – Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001 |
| DIN EN 2856 |
Aerospace series – Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore – Classification: 1100 MPa/235 °C; German and English version EN 2856:2006 |
| DIN EN 2859 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2859:2006 |
| DIN EN 2862 |
Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2862:2009 |
| DIN EN 2863 |
Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 2863:2010 |
| DIN EN 2865 |
Aerospace series – Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2865:2009 |
| DIN EN 2867 |
Aerospace series – nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 2867:2009 |
| DIN EN 2868 |
Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated – Classification: 1 100 MPa (at ambient temperature)/650 °C; German and English version EN 2868:2019 |
| DIN EN 2869 |
Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 2869:2009 |
| DIN EN 2870 |
Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
| DIN EN 2874 |
Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996 |
| DIN EN 2878 |
Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2878:2018+AC:2019 |
| DIN EN 2879 |
Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 2879:2017 |
| DIN EN 2880 |
Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2880:2018+AC:2019 |
| DIN EN 2881 |
Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS₂ lubricated, metric series – Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
| DIN EN 2883 |
Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2883:2009 |
| DIN EN 2884 |
Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
| DIN EN 2885 |
Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996 |
| DIN EN 2886 |
Aerospace series – Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa/235 °C; German version EN 2886:1996 |
| DIN EN 2887 |
Aerospace series – bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2887:1995 |
| DIN EN 2888 |
Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006 |
| DIN EN 2889 |
Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006 |
| DIN EN 2894 |
Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS₂ lubricated – Classification: 1 550 MPa (at ambient temperature) / 315 °C; German and English version EN 2894:2018 |
| DIN EN 2897 |
Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa/235 °C; German version EN 2897:1996 |
| DIN EN 2906 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994 |
| DIN EN 2907 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995 |
| DIN EN 2908 |
Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994 |
| DIN EN 2909 |
Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995 |
| DIN EN 2910 |
Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994 |
| DIN EN 2911 |
Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995 |
| DIN EN 2923 |
Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2923:2019 |
| DIN EN 2924 |
Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2924:2019 |
| DIN EN 2925 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994 |
| DIN EN 2926 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996 |
| DIN EN 2927 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996 |
| DIN EN 2928 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996 |
| DIN EN 2929 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996 |
| DIN EN 2930 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996 |
| DIN EN 2931 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994 |
| DIN EN 2932 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996 |
| DIN EN 2933 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
| DIN EN 2934 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
| DIN EN 2935 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
| DIN EN 2936 |
Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
| DIN EN 2937 |
Aerospace series – Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994 |
| DIN EN 2938 |
Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995 |
| DIN EN 2939 |
Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994 |
| DIN EN 2940 |
Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995 |
| DIN EN 2942 |
Aerospace series – Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998 |
| DIN EN 2943 |
Aerospace series – Inserts, MJ and M screw threads, helical coil – Technical specification; German and English version EN 2943:2019 |
| DIN EN 2944 |
Aerospace series – Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004; German and English version EN 2944:2018 |
| DIN EN 2945 |
Aerospace series – Inserts, screw thread, helical coil, self-locking – Assembly procedure; German version EN 2945:1998 |
| DIN EN 2952 |
Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 270 MPa ≤ Rₘ ≤ 1 550 MPa; German and English version EN 2952:2019 |
| DIN EN 2959 |
Aerospace series – Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) – Solution treated and cold worked – Bar for forged fasteners – 3 mm ≤ D ≤ 30 mm; German and English version EN 2959:2019 |
| DIN EN 2960 |
Aerospace series – Heat resisting nickel base alloy (NI-P101HT) – Cold worked and solution treated – Bars for machining for fasteners – 3 mm ≤ D ≤ 50 mm; German and English version EN 2960:2020 |
| DIN EN 3004 |
Aerospace series – Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997 |
| DIN EN 3005 |
Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated – Classification: 1210 MPa (at ambient temperature)/730 °C – Technical specification; German and English version EN 3005:2004 |
| DIN EN 3006 |
Aerospace series – Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994 |
| DIN EN 3007 |
Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996 |
| DIN EN 3008 |
Aerospace series – Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
| DIN EN 3009 |
Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
| DIN EN 3010 |
Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification 1210 MPa/730 °C; German version EN 3010:1998 |
| DIN EN 3011 |
Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa/730 °C; German version EN 3011:1998 |
| DIN EN 3012 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995 |
| DIN EN 3013 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995 |
| DIN EN 3014 |
Aerospace series – Shank nuts, self-locking, serrated, in heat resisiting steel FE-PA2601 (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3014:2015 |
| DIN EN 3015 |
Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3015:2015 |
| DIN EN 3016 |
Aerospace series – Washers countersunk, load spreading – Heat resisting steel; German and English version EN 3016:2008 |
| DIN EN 3017 |
Aerospace series – Washers, facing/packing – Heat resisting steel; German and English version EN 3017:2008 |
| DIN EN 3019 |
Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3019:2008 |
| DIN EN 3020 |
Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver-plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3020:2008 |
| DIN EN 3033 |
Aerospace series – Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated – Classification: 1100 MPa/425 °C; German and English version EN 3033:2008 |
| DIN EN 3034 |
Aerospace series – Nuts, self-locking, hexagonal, with captive washer – In heat resisting steel FE-PA92HT (A286), silver coated – Classification 1100 MPa/425 °C; German and English version EN 3034:2009 + AC:2011 |
| DIN EN 3035 |
Aerospace series – 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996 |
| DIN EN 3037 |
Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS₂ lubricated – Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996 |
| DIN EN 3038 |
Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996 |
| DIN EN 3043 |
Aerospace series – Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa/650 °C, manufacturing method optional – Technical specification; German and English version EN 3043:2008 |
| DIN EN 3044 |
Aerospance series – Installation holes for inserts, screw thread, helical coil, self-locking – Design standard; German version EN 3044:1998 |
| DIN EN 3052 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3052:2009 |
| DIN EN 3063 |
Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
| DIN EN 3112 |
Aerospace series – Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3112:1995 |
| DIN EN 3152 |
Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated – Classification: 1100 MPa (at ambient temperature)/425 °C – Technical specification; German and English version EN 3152:2004 |
| DIN EN 3196 |
Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994 |
| DIN EN 3201 |
Aerospace series – Holes for metric threaded fasteners – Design standard; German and English version EN 3201:2008 |
| DIN EN 3239 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread – Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995 |
| DIN EN 3240 |
Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3240:2007 |
| DIN EN 3241 |
Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), silver coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3241:2008 |
| DIN EN 3293 |
Aerospace series – Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated – Classification: 1275 MPa/650 °C; German and English version EN 3293:2008 |
| DIN EN 3294 |
Aerospace series – Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts – Classification: 1210 MPa/730 °C; German and English version EN 3294:2008 |
| DIN EN 3299 |
Aerospace series – Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated – Technical specification; German and English version EN 3299:2019 |
| DIN EN 3303 |
Aerospace series – Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997 |
| DIN EN 3304 |
Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS₂ lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996 |
| DIN EN 3305 |
Aerospace series – Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996 |
| DIN EN 3306 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996 |
| DIN EN 3307 |
Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996 |
| DIN EN 3308 |
Aerospace series – Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996 |
| DIN EN 3326 |
Aerospace series – Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) – Classification: 1275 MPa/650 °C, unplated; German and English version EN 3326:2007 |
| DIN EN 3327 |
Aerospace series – Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated – Classification: 1275 MPa/650 °C; German and English version EN 3327:2008 |
| DIN EN 3377 |
Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996 |
| DIN EN 3379 |
Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996 |
| DIN EN 3381 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996 |
| DIN EN 3388 |
Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1 275 MPa/650 °C – Manufacturing method optional – Technical specification; German and English version EN 3388:2009 |
| DIN EN 3389 |
Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) – Classification: 1 210 MPa/730 °C – Manufacturing method optional – Technical specification; German and English version EN 3389:2009 |
| DIN EN 3417 |
Aerospace series – Rivets, solid, universal head, in nickel base alloy NI-P11, metric series; German and English version EN 3417:2012 |
| DIN EN 3431 |
Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated – Classification: 1000 MPa (at ambient temperature)/425 °C; German and English version EN 3431:2007 |
| DIN EN 3435 |
Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS(Index)2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 3435:2010 |
| DIN EN 3536 |
Aerospace series – Nuts, hexagon, self-locking, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006 |
| DIN EN 3537 |
Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3537:2010 |
| DIN EN 3538 |
Aerospace series – Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3538:2010 |
| DIN EN 3539 |
Aerospace series – Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3539:2010 |
| DIN EN 3542 |
Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750); German and English version EN 3542:2018 |
| DIN EN 3543 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997 |
| DIN EN 3613 |
Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1275 MPa/650 °C; German and English version EN 3613:2009 |
| DIN EN 3614 |
Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 900 MPa/650 °C; German and English version EN 3614:2009 |
| DIN EN 3626 |
Aerospace series – Nuts, hexagon, self-locking in steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006 |
| DIN EN 3636 |
Aerospace series – Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa/650 °C; German and English version EN 3636:2008 |
| DIN EN 3637 |
Aerospace series – Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base alloy – NI-P101HT (Waspaloy), silver plated, Classification: 1 210 MPa/730 °C; German and English version EN 3637:2008 |
| DIN EN 3639 |
Aerospace series – Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) – Softened and cold worked – Wires for forged fasteners – D ≤ 15 mm – 900 MPa ≤ Rₘ ≤ 1 100 MPa; German and English version EN 3639:2021 |
| DIN EN 3653 |
Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 3653:2010 |
| DIN EN 3666 |
Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 550 MPa ≤ Rₘ ≤ 1 830 MPa; German and English version EN 3666:2020 |
| DIN EN 3672 |
Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage – Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 3672:2016 |
| DIN EN 3685 |
Aerospace series – Bolts in heat resisting steel FE-PA2601 (A286) – Classification: 1 100 MPa/650 °C – Technical specification; German and English version EN 3685:2019 |
| DIN EN 3686 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa/650 °C; German and English version EN 3686:2008 + AC:2009 |
| DIN EN 3687 |
Aerospace series – Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1 100 MPa/650 °C; German and English version EN 3687:2010 + AC:2011 |
| DIN EN 3720 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995 |
| DIN EN 3721 |
Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995 |
| DIN EN 3722 |
Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995 |
| DIN EN 3723 |
Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996 |
| DIN EN 3724 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 |
| DIN EN 3725 |
Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004 |
| DIN EN 3726 |
Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004 |
| DIN EN 3728 |
Aerospace series – Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3728:2008 |
| DIN EN 3729 |
Aerospace series – Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3729:2008 |
| DIN EN 3740 |
Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS₂ coated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3740:2019 |
| DIN EN 3750 |
Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 3750:2010 |
| DIN EN 3753 |
Aerospace series – Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3753:2010 |
| DIN EN 3757 |
Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/315 °C; German and English version EN 3757:2009 |
| DIN EN 3759 |
Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996 |
| DIN EN 3760 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996 |
| DIN EN 3761 |
Aerospace series – Heat resisting alloy FE-PA2601 – Softened and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 100 MPa ≤ Rₘ ≤ 1 300 MPa; German and English version EN 3761:2020 |
| DIN EN 3763 |
Aerospace series – Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 3763:2010 |
| DIN EN 3768 |
Aerospace series – Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3768:2012 |
| DIN EN 3777 |
Aerospace series – Pins, quick release, single and double acting – Technical specification; German and English version EN 3777:2010 |
| DIN EN 3782 |
Aerospace series – Holes for 100° countersunk head screws – Design standard; German and English version EN 3782:2008 |
| DIN EN 3818 |
Aerospace series – Bolts, MJ threads, in titanium alloy TI-P64001 – Strength class: 1100 MPa (at ambient temperature) – Technical specification; German and English version EN 3818:2019 |
| DIN EN 3820 |
Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2017 |
| DIN EN 3831 |
Aerospace series – Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS₂ coated; German and English version EN 3831:2004 |
| DIN EN 3832 |
Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004 |
| DIN EN 3834 |
Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 3834:2010 |
| DIN EN 3843 |
Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 3843:2010 |
| DIN EN 3907 |
Aerospace series – Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004 |
| DIN EN 3912 |
Aerospace series – Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007 |
| DIN EN 3913 |
Aerospace series – Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components; German and English version EN 3913:2007 |
| DIN EN 3914 |
Aerospace series – Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components; German and English version EN 3914:2008 |
| DIN EN 4009 |
Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004 |
| DIN EN 4011 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4011:2004 |
| DIN EN 4012 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS₂ coated – Classification: 1550 MPa (at ambient temperature)/425 °C; German and English version EN 4012:2004 |
| DIN EN 4013 |
Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4013:2004 |
| DIN EN 4047 |
Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1 550 MPa (at ambient temperature)/600 °C – Technical specification; German and English version EN 4047:2004 |
| DIN EN 4069 |
Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996 |
| DIN EN 4071 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4071:2009 |
| DIN EN 4072 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C; German and English version EN 4072:2016 + AC:2017 |
| DIN EN 4073 |
Aerospace series – Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4073:2016 |
| DIN EN 4074 |
Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4074:2009 |
| DIN EN 4075 |
Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated – Classification: 490 MPa (at ambient temperature) / 425 °C; German and English version EN 4075:2008 |
| DIN EN 4084 |
Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4084:2009 |
| DIN EN 4116 |
Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004 |
| DIN EN 4117 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread – Classification: 1550 MPa (at ambient temperature) / 600 °C; German and English version EN 4117:2004 |
| DIN EN 4118 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4118:2004 |
| DIN EN 4119 |
Aerospace series – Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4119:2004 |
| DIN EN 4120 |
Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread – Classification: 1210 MPa (at ambient temperature)/730 °C; German and English version EN 4120:2004 |
| DIN EN 4121 |
Aerospace series – Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1 100 MPa (at ambient temperature) / 650 °C; German and English version EN 4121:2015 |
| DIN EN 4122 |
Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1 100 MPa (at ambient temperature) / 650 °C; German and English version EN 4122:2018 |
| DIN EN 4123 |
Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread – Classification: 1 550 MPa (at ambient temperature) / 600 °C; German and English version EN 4123:2018 |
| DIN EN 4124 |
Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage – Classification: 1 210 MPa (at ambient temperature) / 730 °C; German and English version EN 4124:2018 |
| DIN EN 4125 |
Aerospace serie – Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS ₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 4125:2010 |
| DIN EN 4126 |
Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 4126:2010 |
| DIN EN 4127 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4127:2009 |
| DIN EN 4128 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature) / 425 °C; German and English version EN 4128:2016 |
| DIN EN 4129 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4129:2009 + AC:2010 |
| DIN EN 4130 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4130:2009 + AC:2010 |
| DIN EN 4131 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature)/425 °C; German and English version EN 4131:2009 + AC:2010 |
| DIN EN 4132 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4132:2009 |
| DIN EN 4133 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4133:2009 |
| DIN EN 4134 |
Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature)/425 °C; German and English version EN 4134:2009 |
| DIN EN 4135 |
Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4135:2009 |
| DIN EN 4136 |
Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature) / 235 °C; German and English version EN 4136:2009 + AC:2010 |
| DIN EN 4137 |
Aerospace series – Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4137:2009 |
| DIN EN 4138 |
Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4138:2016 |
| DIN EN 4161 |
Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1 100 PMa (at ambient temperature)/235 °C; German and English version EN 4161:2019 |
| DIN EN 4162 |
Aerospace series – Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4162:2016 |
| DIN EN 4163 |
Aerospace series – Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4163:2016 |
| DIN EN 4172 |
Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006 |
| DIN EN 4173 |
Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006 |
| DIN EN 4176 |
Aerospace series – Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical specification; German and English version EN 4176:2005 |
| DIN EN 4178 |
Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4178:2017 |
| DIN EN 4303 |
Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4303:2005 |
| DIN EN 4304 |
Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005 |
| DIN EN 4306 |
Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005 |
| DIN EN 4307 |
Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005 |
| DIN EN 4311 |
Aerospace series – Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4321 |
Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004 |
| DIN EN 4322 |
Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004 |
| DIN EN 4323 |
Aerospace series – Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS₂ coated – Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004 |
| DIN EN 4352 |
Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS₂ coated – Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004 |
| DIN EN 4396 |
Aerospace series – Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 4396:2008 |
| DIN EN 4399 |
Aerospace series – Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 4399:2008 |
| DIN EN 4401 |
Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402 |
Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4424 |
Aerospace series – Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys – Dimensions and loads; German and English version EN 4424:2006 |
| DIN EN 4443 |
Aerospace series – Nuts, elliptical clinch, self-locking, MJ threads – in heat resisting steel FE-PA2601 (A286), MoS₂ coated, Classification: 900 MPa (at ambient temperature)/425 °C; German and English version EN 4443:2012 |
| DIN EN 4473 |
Aerospace series – Aluminium pigmented coatings for fasteners – Technical specification; German and English version EN 4473:2010 |
| DIN EN 4493 |
Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated; German and English version EN 4493:2008 |
| DIN EN 4495 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4496 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005 |
| DIN EN 4496 Berichtigung 1 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006 |
| DIN EN 4497 |
Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005 |
| DIN EN 4498 |
Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005 |
| DIN EN 4499 |
Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4499:2009 |
| DIN EN 4501 |
Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 4509 |
Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006 |
| DIN EN 4551 |
Aerospace series – Pipe coupling, 37°, in heat resisting steel – Swivel nuts – Inch series; German and English version EN 4551:2014 |
| DIN EN 4556 |
Aerospace series – Pipe coupling 37°, in heat resisting steel – Cap assemblies – Inch series; German and English version EN 4556:2003 |
| DIN EN 4591 |
Aerospace series – Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS₂ lubricated – Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005 |
| DIN EN 4609 |
Aerospace series – Spiral drive recesses for threaded fasteners – Geometrical definition and technical requirements; German and English version EN 4609:2019 |
| DIN EN 4619 |
Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys – Installation and removal procedure; German and English version EN 4619:2010 |
| DIN EN 4622 |
Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS₂ coated; German and English version EN 4622:2010 |
| DIN EN 4623 |
Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated; German and English version EN 4623:2010 |
| DIN EN 4624 |
Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate; German and English version EN 4624:2010 |
| DIN EN 4634 |
Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated – Classification: 900 MPa (at ambient temperature) / 650 °C; German and English version EN 4634:2009 |
| DIN EN 4635 |
Aerospace series – Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1270 MPa (at ambient temperature) /650 °C; German and English version EN 4635:2009 |
| DIN EN 4636 |
Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4636:2009 |
| DIN EN 4691-1 |
Aerospace series – Tie rod with integrated bolts – Part 1: Technical specification; German and English version EN 4691-1:2017 |
| DIN EN 4695 |
Aerospace series – Tie Rod with integrated bolts – Assembly Code G, H and K; German and English version EN 4695:2017 |
| DIN EN 4852 |
Aerospace series – External spiral drive heads for threaded fasteners – Geometrical definition and fastener head wrenching configuration; German and English version EN 4852:2019 |
| DIN EN 6055 |
Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank – Dimensions and loads – Inch series; German and English version EN 6055:2019 |
| DIN EN 6057 |
Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank – Dimensions and loads, Inch series; German and English version EN 6057:2020 |
| DIN EN 6080 |
Aerospace series – Rivet, 100° normal flush head, close tolerance – Inch series; German and English version EN 6080:2016 |
| DIN EN 6081 |
Aerospace series – Rivet, universal head, close tolerance – Inch series; German and English version EN 6081:2016 |
| DIN EN 6090 |
Aerospace series – Washer, retaining; German and English version EN 6090:2016 |
| DIN EN 6092 |
Aerospace series – Receptacle, floating, double lug |
| DIN EN 6094 |
Aerospace series – Washer, spring, countersunk; German and English version EN 6094:2016 |
| DIN EN 6098 |
Aerospace series – Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank – Dimensions and loads – Inch series; German and English version EN 6098:2019 |
| DIN EN 6101 |
Aerospace series – Rivet, 100° medium flush head, close tolerance – Inch series; German and English version EN 6101:2016 |
| DIN EN 6105 |
Aerospace series – Stud with shoulder; German and English version EN 6105:2016 |
| DIN EN 6128 |
Aerospace series – Blind bolt, 100° flush head, high strength; German and English version EN 6128:2017 |
| DIN EN 6129 |
Aerospace series – Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 + AC:2017 |
| DIN EN 14218 |
Hexagon nuts with flange – Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003 |
| DIN EN 14219 |
Hexagon bolts with flange with metric fine pitch thread – Small series (ISO 15072:1999, modified); German version EN 14219:2003 |
| DIN EN 14399-1 |
High-strength structural bolting assemblies for preloading – Part 1: General requirements; German version EN 14399-1:2015 |
| DIN EN 14399-10 |
High-strength structural bolting assemblies for preloading – Part 10: System HRC – Bolt and nut assemblies with calibrated preload; German version EN 14399-10:2018 |
| DIN EN 14399-2 |
High-strength structural bolting assemblies for preloading – Part 2: Suitability for preloading; German version EN 14399-2:2015 |
| DIN EN 14399-3 |
High-strength structural bolting assemblies for preloading – Part 3: System HR – Hexagon bolt and nut assemblies; German version EN 14399-3:2015 |
| DIN EN 14399-4 |
High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies; German version EN 14399-4:2015 |
| DIN EN 14399-5 |
High-strength structural bolting assemblies for preloading – Part 5: Plain washers; German version EN 14399-5:2015 |
| DIN EN 14399-6 |
High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers; German version EN 14399-6:2015 |
| DIN EN 14399-7 |
High-strength structural bolting assemblies for preloading – Part 7: System HR – Countersunk head bolt and nut assemblies; German version EN 14399-7:2018 |
| DIN EN 14399-8 |
High-strength structural bolting assemblies for preloading – Part 8: System HV – Hexagon fit bolt and nut assemblies; German version EN 14399-8:2018 |
| DIN EN 14399-9 |
High-strength structural bolting assemblies for preloading – Part 9: System HR or HV – Direct tension indicators for bolt and nut assemblies; German version EN 14399-9:2018 |
| DIN EN 14566 |
Mechanical fasteners for gypsum plasterboard systems – Definitions, requirements and test methods; German version EN 14566:2008+A1:2009 |
| DIN EN 14831 |
Fasteners – Tightening performance – Torque/Angle simplified test method; German version EN 14831:2005 |
| DIN EN 15048-1 |
Non-preloaded structural bolting assemblies – Part 1: General requirements; German version EN 15048-1:2016 |
| DIN EN 15048-2 |
Non-preloaded structural bolting assemblies – Part 2: Fitness for purpose; German version EN 15048-2:2016 |
| DIN EN 15180 |
Food processing machinery – Food depositors – Safety and hygiene requirements; German version EN 15180:2014 |
| DIN EN 20273 |
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 |
| DIN EN 20898-7 |
Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995 |
| DIN EN 22339 |
Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992 |
| DIN EN 22340 |
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992 |
| DIN EN 22341 |
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992 |
| DIN EN 24015 |
Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 |
| DIN EN 26157-1 |
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 |
| DIN EN 26157-3 |
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 |
| DIN EN 26891 |
Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991 |
| DIN EN 27434 |
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992 |
| DIN EN 27435 |
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992 |
| DIN EN 27436 |
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992 |
| DIN EN 27721 |
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991 |
| DIN EN 28736 |
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992 |
| DIN EN 28737 |
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992 |
| DIN EN 28738 |
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992 |
| DIN EN 28749 |
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992 |
| DIN EN 28839 |
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 |
| DIN EN ISO 225 |
Fasteners – Bolts, screws, studs and nuts – Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010 |
| DIN EN ISO 888 |
Fasteners – Bolts, screws and studs – Nominal lengths and thread lengths (ISO 888:2012); German version EN ISO 888:2018 |
| DIN EN ISO 898-1 |
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013 |
| DIN EN ISO 898-2 |
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 2: Nuts with specified property classes – Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012 |
| DIN EN ISO 898-3 |
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO 898-3:2018); German version EN ISO 898-3:2018 |
| DIN EN ISO 898-5 |
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar threaded fasteners with specified hardness classes – Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012 |
| DIN EN ISO 1234 |
Split pins (ISO 1234:1997); German version EN ISO 1234:1997 |
| DIN EN ISO 1478 |
Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999 |
| DIN EN ISO 1479 |
Hexagon head tapping screws (ISO 1479:2011); German version EN ISO 1479:2011 |
| DIN EN ISO 1481 |
Slotted pan head tapping screws (ISO 1481:2011); German version EN ISO 1481:2011 |
| DIN EN ISO 1482 |
Slotted countersunk (flat) head tapping screws (ISO 1482:2011); German version EN ISO 1482:2011 |
| DIN EN ISO 1483 |
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011); German version EN ISO 1483:2011 |
| DIN EN ISO 1580 |
Slotted pan head screws – Product grade A (ISO 1580:2011); German version EN ISO 1580:2011 |
| DIN EN ISO 1891-2 |
Fasteners – Terminology – Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014); Multilingual version EN ISO 1891-2:2014 |
| DIN EN ISO 1891-4 |
Fasteners – Vocabulary – Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018); Multilingual version EN ISO 1891-4:2018 |
| DIN EN ISO 2009 |
Slotted countersunk flat head screws – Product grade A (ISO 2009:2011); German version EN ISO 2009:2011 |
| DIN EN ISO 2010 |
Slotted raised countersunk head screws – Product grade A (ISO 2010:2011); German version EN ISO 2010:2011 |
| DIN EN ISO 2320 |
Fasteners – Prevailing torque steel nuts – Functional properties (ISO 2320:2015); German version EN ISO 2320:2015 |
| DIN EN ISO 2338 |
Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997 |
| DIN EN ISO 2342 |
Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
| DIN EN ISO 2702 |
Heat-treated steel tapping screws – Mechanical properties (ISO 2702:2011); German version EN ISO 2702:2011 |
| DIN EN ISO 3266 |
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010 + Amd 1:2015); German version EN ISO 3266:2010 + A1:2015 |
| DIN EN ISO 3269 |
Fasteners – Acceptance inspection (ISO 3269:2019); German version EN ISO 3269:2019 |
| DIN EN ISO 3506-1 |
Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020 |
| DIN EN ISO 3506-2 |
Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020); German version EN ISO 3506-2:2020 |
| DIN EN ISO 3506-3 |
Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009 |
| DIN EN ISO 3506-4 |
Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009 |
| DIN EN ISO 4014 |
Hexagon head bolts – Product grades A and B (ISO 4014:2011); German version EN ISO 4014:2011 |
| DIN EN ISO 4016 |
Hexagon head bolts – Product grade C (ISO 4016:2011); German version EN ISO 4016:2011 |
| DIN EN ISO 4017 |
Fasteners – Hexagon head screws – Product grades A and B (ISO 4017:2014); German version EN ISO 4017:2014 |
| DIN EN ISO 4018 |
Hexagon head screws – Product grade C (ISO 4018:2011); German version EN ISO 4018:2011 |
| DIN EN ISO 4026 |
Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
| DIN EN ISO 4027 |
Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003 |
| DIN EN ISO 4028 |
Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
| DIN EN ISO 4029 |
Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
| DIN EN ISO 4032 |
Hexagon regular nuts (style 1) – Product grades A and B (ISO 4032:2012); German version EN ISO 4032:2012 |
| DIN EN ISO 4033 |
Hexagon high nuts (style 2) – Product grades A and B (ISO 4033:2012); German version EN ISO 4033:2012 |
| DIN EN ISO 4034 |
Hexagon regular nuts (style 1) – Product grade C (ISO 4034:2012); German version EN ISO 4034:2012 |
| DIN EN ISO 4035 |
Hexagon thin nuts chamfered (style 0) – Product grades A and B (ISO 4035:2012); German version EN ISO 4035:2012 |
| DIN EN ISO 4042 |
Fasteners – Electroplated coating systems (ISO 4042:2018); German version EN ISO 4042:2018 |
| DIN EN ISO 4519 |
Electrodeposited metallic coatings and related finishes – Sampling procedures for inspection by attributes (ISO 4519:1980); German version EN ISO 4519:2016 |
| DIN EN ISO 4526 |
Metallic coatings – Electroplated coatings of nickel for engineering purposes (ISO 4526:2004); German version EN ISO 4526:2004 |
| DIN EN ISO 4753 |
Fasteners – Ends of parts with external ISO metric thread (ISO 4753:2011); German version EN ISO 4753:2011 |
| DIN EN ISO 4759-1 |
Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3 |
Tolerances for fasteners – Part 3: Washers for bolts, screws and nuts – Product grades A, C and F (ISO 4759-3:2016); German version EN ISO 4759-3:2016 |
| DIN EN ISO 4762 |
Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004 |
| DIN EN ISO 4766 |
Slotted set screws with flat point (ISO 4766:2011); German version EN ISO 4766:2011 |
| DIN EN ISO 6157-2 |
Fasteners – Surface discontinuities – Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004 |
| DIN EN ISO 6789-1 |
Assembly tools for screws and nuts – Hand torque tools – Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017); German version EN ISO 6789-1:2017 |
| DIN EN ISO 6789-2 |
Assembly tools for screws and nuts – Hand torque tools – Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017 |
| DIN EN ISO 7040 |
Prevailing torque type hexagon regular nuts (with non-metallic insert) – Property classes 5, 8 and 10 (ISO 7040:2012); German version EN ISO 7040:2012 |
| DIN EN ISO 7042 |
Prevailing torque type all-metal hexagon high nuts – Property classes 5, 8, 10 and 12 (ISO 7042:2012); German version EN ISO 7042:2012 |
| DIN EN ISO 7045 |
Pan head screws with type H or type Z cross recess – Product grade A (ISO 7045:2011); German version EN ISO 7045:2011 |
| DIN EN ISO 7046-1 |
Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011); German version EN ISO 7046-1:2011 |
| DIN EN ISO 7046-2 |
Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011); German version EN ISO 7046-2:2011 |
| DIN EN ISO 7047 |
Raised countersunk head screws (common head style) with type H or type Z cross recess – Product grade A (ISO 7047:2011); German version EN ISO 7047:2011 |
| DIN EN ISO 7048 |
Cross-recessed cheese head screws (ISO 7048:2011); German version EN ISO 7048:2011 |
| DIN EN ISO 7049 |
Cross-recessed pan head tapping screws (ISO 7049:2011); German version EN ISO 7049:2011 |
| DIN EN ISO 7050 |
Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011); German version EN ISO 7050:2011 |
| DIN EN ISO 7051 |
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011); German version EN ISO 7051:2011 |
| DIN EN ISO 7053 |
Fasteners – Hexagon washer head tapping screws (ISO 7053:2019); German version EN ISO 7053:2019 |
| DIN EN ISO 7089 |
Plain washers – Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000 |
| DIN EN ISO 7090 |
Plain washers, chamfered – Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000 |
| DIN EN ISO 7091 |
Plain washers – Normal series – Product grade C (ISO 7091:2000); German version EN ISO 7091:2000 |
| DIN EN ISO 7092 |
Plain washers – Small series – Product grade A (ISO 7092:2000); German version EN ISO 7092:2000 |
| DIN EN ISO 7093-1 |
Plain washers – Large series – Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000 |
| DIN EN ISO 7093-2 |
Plain washers – Large series – Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000 |
| DIN EN ISO 7094 |
Plain washers – Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000 |
| DIN EN ISO 7380-1 |
Button head screws – Part 1: Hexagon socket button head screws (ISO 7380-1:2011); German version EN ISO 7380-1:2011 |
| DIN EN ISO 7380-2 |
Button head screws – Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011); German version EN ISO 7380-2:2011 |
| DIN EN ISO 7719 |
Prevailing torque type all-metal hexagon regular nuts – Property classes 5, 8 and 10 (ISO 7719:2012); German version EN ISO 7719:2012 |
| DIN EN ISO 7721-2 |
Countersunk flat head screws – Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
| DIN EN ISO 8565 |
Metals and alloys – Atmospheric corrosion testing – General requirements (ISO 8565:2011); German version EN ISO 8565:2011 |
| DIN EN ISO 8673 |
Hexagon regular nuts (style 1) with metric fine pitch thread – Product grades A and B (ISO 8673:2012); German version EN ISO 8673:2012 |
| DIN EN ISO 8674 |
Hexagon high nuts (style 2) with metric fine pitch thread – Product grades A and B (ISO 8674:2012); German version EN ISO 8674:2012 |
| DIN EN ISO 8675 |
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread – Product grades A and B (ISO 8675:2012); German version EN ISO 8675:2012 |
| DIN EN ISO 8676 |
Hexagon head screws with metric fine pitch thread – Product grades A and B (ISO 8676:2011); German version EN ISO 8676:2011 |
| DIN EN ISO 8733 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
| DIN EN ISO 8734 |
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
| DIN EN ISO 8735 |
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
| DIN EN ISO 8739 |
Grooved pins – Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
| DIN EN ISO 8740 |
Grooved pins – Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
| DIN EN ISO 8741 |
Grooved pins – Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
| DIN EN ISO 8742 |
Grooved pins – One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
| DIN EN ISO 8743 |
Grooved pins – Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
| DIN EN ISO 8744 |
Grooved pins – Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
| DIN EN ISO 8745 |
Grooved pins – Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
| DIN EN ISO 8746 |
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
| DIN EN ISO 8747 |
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
| DIN EN ISO 8748 |
Spring-type straight pins – Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007 |
| DIN EN ISO 8750 |
Spring-type straight pins – Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007 |
| DIN EN ISO 8751 |
Spring-type straight pins – Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007 |
| DIN EN ISO 8752 |
Spring-type straight pins – Slotted, heavy duty (ISO 8752:2009); German version EN ISO 8752:2009 |
| DIN EN ISO 8765 |
Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765:2011); German version EN ISO 8765:2011 |
| DIN EN ISO 10510 |
Tapping screw and washer assemblies with plain washers (ISO 10510:2011); German version EN ISO 10510:2011 |
| DIN EN ISO 10511 |
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012); German version EN ISO 10511:2012 |
| DIN EN ISO 10512 |
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread – Property classes 6, 8 and 10 (ISO 10512:2012); German version EN ISO 10512:2012 |
| DIN EN ISO 10513 |
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12 (ISO 10513:2012); German version EN ISO 10513:2012 |
| DIN EN ISO 10642 |
Fasteners – Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019); German version EN ISO 10642:2019 |
| DIN EN ISO 10644 |
Screw and washer assemblies made of steel with plain washers – Washer hardness classes 200 HV and 300 HV (ISO 10644:2009); German version EN ISO 10644:2009 |
| DIN EN ISO 10664 |
Hexalobular internal driving feature for bolts and screws (ISO 10664:2014); German version EN ISO 10664:2014 |
| DIN EN ISO 10666 |
Drilling screws with tapping screw thread – Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
| DIN EN ISO 10669 |
Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| DIN EN ISO 10673 |
Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A (ISO 10673:2009); German version EN ISO 10673:2009 |
| DIN EN ISO 10683 |
Fasteners – Non-electrolytically applied zinc flake coating systems (ISO 10683:2018); German version EN ISO 10683:2018 |
| DIN EN ISO 10684 |
Fasteners – Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008); German version EN ISO 10684:2004 + AC:2009 |
| DIN EN ISO 12474 |
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010); German version EN ISO 12474:2010 |
| DIN EN ISO 13337 |
Spring-type straight pins – Slotted, light duty (ISO 13337:2009); German version EN ISO 13337:2009 |
| DIN EN ISO 13894-1 |
High-pressure decorative laminates – Composite elements – Part 1 : Test methods (ISO 13894-1:2000); German version EN ISO 13894-1:2015 |
| DIN EN ISO 13918 |
Welding – Studs and ceramic ferrules for arc stud welding (ISO 13918:2017); German version EN ISO 13918:2018 |
| DIN EN ISO 14579 |
Hexalobular socket head cap screws (ISO 14579:2011); German version EN ISO 14579:2011 |
| DIN EN ISO 14580 |
Hexalobular socket cheese head screws (ISO 14580:2011); German version EN ISO 14580:2011 |
| DIN EN ISO 14581 |
Fasteners – Hexalobular socket countersunk flat head screws (ISO 14581:2013); German version EN ISO 14581:2013 |
| DIN EN ISO 14582 |
Fasteners – Hexalobular socket countersunk head screws, high head (ISO 14582:2013); German version EN ISO 14582:2013 |
| DIN EN ISO 14583 |
Hexalobular socket pan head screws (ISO 14583:2011); German version EN ISO 14583:2011 |
| DIN EN ISO 14584 |
Hexalobular socket raised countersunk head screws (ISO 14584:2011); German version EN ISO 14584:2011 |
| DIN EN ISO 14585 |
Hexalobular socket pan head tapping screws (ISO 14585:2011); German version EN ISO 14585:2011 |
| DIN EN ISO 14586 |
Hexalobular socket countersunk head tapping screws (ISO 14586:2011); German version EN ISO 14586:2011 |
| DIN EN ISO 14587 |
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011); German version EN ISO 14587:2011 |
| DIN EN ISO 14588 |
Blind rivets – Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000 |
| DIN EN ISO 14589 |
Blind rivets – Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000 |
| DIN EN ISO 14713-1 |
Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017); German version EN ISO 14713-1:2017 |
| DIN EN ISO 14713-2 |
Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 2: Hot dip galvanizing (ISO 14713-2:2019); German version EN ISO 14713-2:2020 |
| DIN EN ISO 14713-3 |
Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 3: Sherardizing (ISO 14713-3:2017); German version EN ISO 14713-3:2017 |
| DIN EN ISO 15065 |
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005 |
| DIN EN ISO 15330 |
Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999 |
| DIN EN ISO 15480 |
Fasteners – Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019); German version EN ISO 15480:2019 |
| DIN EN ISO 15481 |
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999 |
| DIN EN ISO 15482 |
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999 |
| DIN EN ISO 15483 |
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999 |
| DIN EN ISO 15973 |
Closed end blind rivets with break pull mandrel and protruding head – AlA/St (ISO 15973:2000); German version EN ISO 15973:2000 |
| DIN EN ISO 15974 |
Closed end blind rivets with break pull mandrel and countersunk head – AlA/St (ISO 15974:2000); German version EN ISO 15974:2000 |
| DIN EN ISO 15975 |
Closed end blind rivets with break pull mandrel and protruding head – Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002 |
| DIN EN ISO 15976 |
Closed end blind rivets with break pull mandrel and protruding head – St/St (ISO 15976:2002); German version EN ISO 15976:2002 |
| DIN EN ISO 15977 |
Open end blind rivets with break pull mandrel and protruding head – AlA/St (ISO 15977:2002); German version EN ISO 15977:2002 |
| DIN EN ISO 15978 |
Open end blind rivets with break pull mandrel and countersunk head – AlA/St (ISO 15978:2002); German version EN ISO 15978:2002 |
| DIN EN ISO 15979 |
Open end blind rivets with break pull mandrel and protruding head – St/St (ISO 15979:2002); German version EN ISO 15979:2002 |
| DIN EN ISO 15980 |
Open end blind rivets with break pull mandrel and countersunk head – St/St (ISO 15980:2002); German version EN ISO 15980:2002 |
| DIN EN ISO 15981 |
Open end blind rivets with break pull mandrel and protruding head – AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002 |
| DIN EN ISO 15982 |
Open end blind rivets with break pull mandrel and countersunk head – AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002 |
| DIN EN ISO 15983 |
Open end blind rivets with break pull mandrel and protruding head – A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002 |
| DIN EN ISO 15984 |
Open end blind rivets with break pull mandrel and countersunk head – A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002 |
| DIN EN ISO 16047 |
Fasteners – Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012); German version EN ISO 16047:2005 + A1:2012 |
| DIN EN ISO 16048 |
Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003 |
| DIN EN ISO 16228 |
Fasteners – Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018 |
| DIN EN ISO 16426 |
Fasteners – Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002 |
| DIN EN ISO 16582 |
Open end blind rivets with break pull mandrel and protruding head – Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002 |
| DIN EN ISO 16583 |
Open end blind rivets with break pull mandrel and countersunk head – Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002 |
| DIN EN ISO 16584 |
Open end blind rivets with break pull mandrel and protruding head – NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002 |
| DIN EN ISO 16585 |
Closed end blind rivets with break pull mandrel and protruding head – A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002 |
| DIN EN ISO 17475 |
Corrosion of metals and alloys – Electrochemical test methods – Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008 |
| DIN EN ISO 17668 |
Zinc diffusion coatings on ferrous products – Sherardizing – Specification (ISO 17668:2016); German version EN ISO 17668:2016 |
| DIN EN ISO 19598 |
Metallic coatings – Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016); German version EN ISO 19598:2016 |
| DIN EN ISO 20728 |
Corrosion of metal and alloys – Determination of resistance of magnesium alloys to stress corrosion cracking (ISO 20728:2018); German version EN ISO 20728:2018 |
| DIN EN ISO 21670 |
Fasteners – Hexagon weld nuts with flange (ISO 21670:2014); German version EN ISO 21670:2014 |
| DIN EN ISO 26203-1 |
Metallic materials – Tensile testing at high strain rates – Part 1: Elastic-bar-type systems (ISO 26203-1:2018); German version EN ISO 26203-1:2018 |
| DIN ISO 68-1 |
ISO general purpose metric screw threads – Basic profile – Part 1: Metric screw threads (ISO 68-1:1998) |
| DIN ISO 261 |
ISO general purpose metric screw threads – General plan (ISO 261:1998) |
| DIN ISO 262 |
ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts (ISO 262:1998) |
| DIN ISO 272 |
Fasteners; Width across Flats for Hexagon Products |
| DIN ISO 691 |
Assembly tools for screws and nuts – Wrench and socket openings – Tolerances for general use (ISO 691:2005) |
| DIN ISO 724 |
ISO general purpose metric screw threads – Basic dimensions (ISO 724:1993 + Cor. 1:2009) |
| DIN ISO 885 |
General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000) |
| DIN ISO 965-1 |
ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data (ISO 965-1:2013) |
| DIN ISO 965-2 |
ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) |
| DIN ISO 965-3 |
ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional threads (ISO 965-3:1998) |
| DIN ISO 965-4 |
ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998) |
| DIN ISO 965-5 |
ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998) |
| DIN ISO 1085 |
Assembly tools for screws and nuts – Double-ended wrenches – Size pairing (ISO 1085:2016) |
| DIN ISO 1173 |
Assembly tools for screws and nuts – Drive ends for hand- and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing (ISO 1173:2001) |
| DIN ISO 1502 |
ISO general purpose metric screw threads – Gauges and gauging (ISO 1502:1996) |
| DIN ISO 1711-1 |
Assembly tools for screws and nuts – Technical specifications – Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2019) |
| DIN ISO 1711-2 |
Assembly tools for screws and nuts – Technical specifications – Part 2: Machine-operated sockets (impact) (ISO 1711-2:2019) |
| DIN ISO 1891 |
Fasteners – Terminology (ISO 1891:2009) |
| DIN ISO 2351-1 |
Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) |
| DIN ISO 2351-2 |
Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002) |
| DIN ISO 2351-3 |
Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2014) |
| DIN ISO 2380-1 |
Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004) |
| DIN ISO 2380-2 |
Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004) |
| DIN ISO 2936 |
Assembly tools for screws and nuts – Hexagon socket screw keys (ISO 2936:2014) |
| DIN ISO 3317 |
Assembly tools for screws and nuts – Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015) |
| DIN ISO 3408-1 |
Ball screws – Part 1: Vocabulary and designation (ISO 3408-1:2006) |
| DIN ISO 3408-3 |
Ball screws – Part 3: Acceptance conditions and acceptance tests (ISO 3408-3:2006) |
| DIN ISO 3408-4 |
Ball screws – Part 4: Static axial rigidity (ISO 3408-4:2006) |
| DIN ISO 3408-5 |
Ball screws – Part 5: Static and dynamic axial load ratings and operational life (ISO 3408-5:2006) |
| DIN ISO 5845-1 |
Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 1: General principles (ISO 5845-1:1995) |
| DIN ISO 5845-2 |
Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 2: Rivets for aerospace equipment (ISO 5845-2:1995) |
| DIN ISO 5855-2 |
Aerospace – MJ threads – Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English |
| DIN ISO 6005 |
Alpine skis – Ski bindings screws – Test methods; identical with ISO 6005:1991 |
| DIN ISO 8764-1 |
Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 1: Driver tips (ISO 8764-1:2004) |
| DIN ISO 8764-2 |
Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004) |
| DIN ISO 8992 |
Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| DIN ISO 9154 |
Aerospace – Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa – Procurement specification (ISO 9154:2016); Text in German and English |
