ASTM F467 Monel Alloy K500 Fastener, High-Quality Monel K500 Fasteners, Monel N05500 Fasteners, Dimensions of ASME B18.2.1 Alloy K500 Heavy Hex Bolt, Monel K500 Fasteners Manufacturer in Mumbai, India, Monel Alloy K500 Bolts Supplier in Mumbai, India.
ASME SF467 Monel K500 Fasteners, Monel UNS N05500 Fastener, Monel K500 Bolt, Monel K500 Nuts, Monel K500 Square Washers, Monel® K500 Anchor Fasteners, K500 Monel Half and Full Threaded Stud Bolts Stockist, Monel Alloy K500 Fasteners Supplier in Mumbai.
Monel K500 Fasteners is a leading producer and retailer of Prashaant Steel & Alloys. We manufacture ASTM B366 Monel K500 Fasteners at our gigantic factory using modern machinery and the latest technologies. Only high quality Monel UNS N05500 Fasteners are obtained from Prashaant Steel & Alloys. Therefore, our diverse inventory utilizes the highest quality of raw materials available. The Monel K500 Fasteners we make have a strong foundation and exhibit outstanding characteristics. We produce the Monel UNS N05500 Fasteners in a variety of styles and sizes suitable for use in many industries. We also take custom orders from our customers that produce the ASTM B366 Monel K500 Fasteners, according to their demand and needs. At Piyush Steel, we are focused on offering our best to our customers, and we use the highest quality raw materials to manufacture Monel K500 Fasteners. Thanks to the incredible resistant properties we have, these Monel K500 Fasteners are commonly used in various applications.
The yield strength of the Monel k500 Washers is almost three times more and the tensile strength of the Monel k500 Nuts is almost two times more than Monel 400 even at an elevated temperature of around 1200° F. Further, the tensile strength of these Monel k500 Bolts can be enhanced by cold working the alloy before its precipitation hardening.
When metals like aluminium and titanium are added to the nickel-copper base of the alloy, the strength and hardness properties tend to get amplified. Apart from the addition of these metals, thermally processing the Alloy k500 Bolts in order to cause precipitation, or what is known as age hardening or aging. During the age hardening process, the alloy is heated at controlled conditions, so the sub-microscopic particles of Nickel ,Titanium as well as Aluminium get precipitated throughout the matrix.
Although the corrosion resistance of Monel k500 Bolts and Nuts is substantially equivalent to that of Monel 400 fasteners, in an age-hardened condition, Monel k500 Screws could have a greater tendency toward stress related corrosion cracking in some environments. Alloy k500 Fasteners have been found to be resistant to a sour-gas environment. In high-velocity sea water, the rate of corrosion is very low while maintaining its high strength.
These qualities make the Monel k500 Hex Bolt particularly well suited to be used in shafts of centrifugal pumps in marine service. In stagnant or slow-moving marine environments, the Monel k500 Hex Nuts could get befouled followed by the occurrence of pitting. Pitting on the Monel k500 Fasteners slows down after a fairly rapid initial attack.
ASTM B366 Monel K500 Fasteners are used for various purposes in several industries. For many marine applications, the Monel UNS N05500 Fasteners are used because of their resistive strength. The use of Monel K500 Fasteners is also used in marine engineering, gasoline, and freshwater tanks and. Crude oil distillation towers and chlorinated solvents are some of the applications in which ASTM B366 Monel K500 Fasteners are used.
We also perform several quality checks on our goods to ensure that our customers receive only the highest quality of Monel UNS N05500 Fasteners and they are at par with international and national quality standards. Some of the tests that our Monel K500 Fasteners undergo are Positive Material Identification – PMI Testing, Chemical Analysis – Spectra Analysis, Mechanical Testing Such as Tensile of Area, Intergranular Corrosion (IGC) Test, Pitting Resistance Test, Micro, and Macro Test.
Monel Alloy K500 Fasteners Specification:
|Standard||ASTM F467 / F468 / B161, ASME SF467 / SF468 / SB161|
|Standard||DIN, ASTM, BS and all International Standards|
|Length||3 mm to 200 mm|
|Size||M3 – M56 | 3/6″ to 2″ | Custom Sizes|
Monel K500 Fasteners Chemical Properties:
|Monel K500||63.00 min||0.25 max||–||1.5 max||0.5 max||0.5 – 2||27.00 – 33.00||0.010 max|
Monel K500 Fasteners Mechanical Properties:
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.44 g/cm3||1350 °C (2460 °F)||Psi – 115000 , MPa – 790||Psi – 160000 , MPa – 1100||20 %|
Equivalent Grades of F467 Monel K500 Fasteners:
Types OF Monel K500 Fasteners:
- Monel K500 Nuts
- Monel Alloy K500 Bolts
- Alloy K500 Screw
- Monel® Alloy K500 Washer
- Monel K500 Studs
- Monel K500 Square Nut
- Monel N05500 Fastener
- Monel 2.4375 Fasteners Stockist
- K500 Monel Machine Screw
- Monel K500 Socket Head Cap Screw
- Monel K500 Wing Screw Supplier
- Monel Alloy K500 Coupling Nuts
- Alloy K500 Allen Cap Screw Wholesaler
- Monel Alloy K500 Split Lock Washers